User`s guide

CSX200 Configuration with QuickSET
70 CSX200 Family User’s Guide
Bridging and Routing (WAN Frame Type) Configuration Window
The Bridging and Routing (WAN Frame Type) window shown in Figure 29 displays after clicking
on the N
ext>> button in the first Bridging and Routing configuration window. This window is used
to select a WAN Frame Type for each interface.
Figure 29 Bridging and Routing (WAN Frame Type) Window
The Bridging and Routing (WAN Frame Type) window displays fields for each interface number
and its associated WAN Frame Type. Select the WAN Native frame type for router to router
communication. Select the Encapsulated Ethernet or Encapsulated Ethernet SNAP frame types for
router-to-bridge, or bridge-to-bridge communication.
To change the WAN Frame Type information, scroll through the list of interface entries, and select
the interface number you wish to modify by pressing the arrow button on the left side of the
Interface # field and press the M
odify... button. The WAN Frame Type window displays.