User`s guide

CSX200 Configuration with QuickSET

64 CSX200 Family User’s Guide

Once the Wide Area HDSL Time Slot conﬁguration is complete, click on the Next>> button, and

go to the Bridging and Routing Configuration window.

Bridging and Routing Conﬁguration

Once all the necessary network information is collected for the WAN, the CSX200 can be

conﬁgured for bridging and/or routing using QuickSET.

Bridging and Routing Conﬁguration Window

The ﬁrst Bridging and Routing conﬁguration window shown in Figure 27 displays after clicking

on the N

ext>> button at the bottom of the Wide Area (Frame Relay, PPP, or HDSL) Time Slot

conﬁguration window or the Wide Area (Sync or DDS) conﬁguration window.

Figure 27 Bridging and Routing Conﬁguration Window