User`s guide

Installation
CSX200 Family User’s Guide 35
Continue the installation by connecting power as described in Connecting the CSX200 to the
Power Source.
Connecting the CSX200 to the Power Source
To connect the CSX200 to the power source, perform the following steps:
1. Plug the power cord into the back panel of the CSX200.
2. Plug the other end of the power cord into a grounded wall outlet.
3. Verify that the PWR LED is on, indicating that the CSX200 is receiving power. After the
CSX200 runs a self test, the CPU LED blinks green indicating normal operation. If the LED
remains red, the processor is faulty; contact Cabletron Systems (refer to Getting Help in
Chapter 1).
NOTE
The CSX200 has a universal power supply. This allows you to connect the CSX200 to
power sources of 100–125 and 200–240 Vac, 50/60 Hz.