User`s guide

Installation
32 CSX200 Family User’s Guide
CSX200 Rackmount Installation
To attach the rackmount brackets, Cabletron Systems offers an accessory kit that includes
rackmount brackets, mounting screws, and a strain-relief bracket for cable management. The
accessory kit is not included with the CSX200, but is purchased separately from Cabletron
Systems as part number CSX200-ACCY-KIT.
Rack mounting the CSX200 requires the following steps:
• Attaching the strain-relief bracket
• Attaching the rackmount brackets
• Installing the CSX200 in a 19-inch rack
• Connecting the CSX200 to a power source
Tools Required
• Phillips screwdriver
Materials Required
The following parts are included in the CSX200-ACCY-KIT.
• Strain-relief bracket (Figure 8)
• Left and right rackmount brackets (Figure 8)
• 8-32 x 1/4-inch, pan-head screws (4)
• 8-32 x 3/8-inch, pan-head screws (4)
WARNING
Before installing the CSX200 into a rack, ensure that the rack supports the device(s)
without compromising the stability of the rack. Otherwise, personal injury and/or
equipment damage may result.
!
CAUTION
Do not use any screws other than those supplied with the CSX200-ACCY-KIT to perform
the following procedures.