User`s guide

Installation
30 CSX200 Family User’s Guide
5. Locate the D-Type connector and the standoffs on the chassis (refer to Figure 6).
6. The D-Type connector pins of the CSX200-COMP/ENCR only fit one way onto the CSX200
D-Type connector. Lower the CSX200-COMP/ENCR onto the standoffs and align the
connector with the connector pins. Carefully insert the connector pins of the CSX200-COMP/
ENCR into the CSX200 connector.
7. Press down firmly on the CSX200-COMP/ENCR until the pins fit all the way into the
connector.
8. Secure the CSX200-COMP/ENCR with the standoff screws supplied with the
CSX200-COMP/ENCR.
The CSX200-COMP/ENCR installation is complete.
Figure 6 CSX200-COMP/ENCR Installation
NOTE
Ensure that the CSX200-COMP/ENCR is aligned such that its connector pins
correctly align with the D-Type connector on the chassis.
Standoff Screws
Standoff
D-Type
Connector
CSX-COMP/ENCR
D-Type
Connector Pins
Detail
2204N01