User`s guide

Installation
28 CSX200 Family User’s Guide
Installing the WAN Port Interface Module (WPIM)
To install a WPIM into the CSX200, refer to Figure 5 and complete the following steps:
Figure 5 Installing WPIMs
!
CAUTION
Before performing installation procedures, ensure that the requirements outlined in the
section, Tabletop and Shelf Installations, on page 31, are met.
!
CAUTION
When removing an existing WPIM, make sure to pull the module straight out to avoid
damaging the connector.
WPIM
WPIM Screws
Standoffs
WPIM
Connector Pins
WPIM
Connector