User`s guide

MIB Navigator
198 CSX200 Family User’s Guide
route:
Syntax: route add <IPADDRESS> <IPADDRESS> <INTERFACENUM>
route add <IPADDRESS> <IPADDRESS> <INTERFACENUM>
<METRIC>
route delete <IPADDRESS> <IPADDRESS> <INTERFACENUM>
Description: Allows you to add or delete static entries in the IP Forwarding Table for
the device. The first address is the destination. The second address is the
next hop for the given interface. The metric value is optional. If included,
it is used to set the value of ipForwardingMetric1. When RIP is used,
the metric specifies the distance in hops to the destination.
secondIP:
Syntax: secondIP add <IPADDRESS> <INTERFACENUM>
secondIP delete <IPADDRESS> <INTERFACENUM>
Description: Allows you to add or delete secondary IP addresses on the interface.
Options: Not Applicable
show:
Syntax: show <PROTOCOL> [TABLE]
Description: The show command displays information concerning various
components of the device. Protocols currently supported are IP and IPX.
Components of those protocols that are currently supported are ARP
caches, route tables, FIB tables, server tables, and interface tables. The
number of valid entries in the table is outputted at the end of the table
display.
Example:
MIBNav-> show IP ARP
----------------------------------------------------------------------------------------------------------------
NetworkAddress
203
102
Physical Address
00:00:1d:04:40:5d
08:00:20:0e:d8:31
MediaType
(dynamic)
(dynamic)
# Interface
# 4
# 4
show