User`s guide

MIB Navigator
196 CSX200 Family User’s Guide
bridge:
Syntax: bridge <ENABLE/DISABLE> <IFNUM/ALL>
Description: Allows management of bridging upon one or more interfaces of the
device. Bridging may be enabled or disabled at your request, either one
at a time or all at once. Specifying a single interface number affects the
bridging status of that interface, while specifying ALL affects every
interface of the device.
Options: <ENABLE/DISABLE> Enables or disables bridging.
<IFNUM/ALL> Allows you to specify an interface number.
Example:
circuitmap:
Syntax: circuitmap -a <PROTOCOL>
circuitmap -f <PROTOCOL>
circuitmap -d <PROTOCOL> <INTERFACENUM>
<NETADDRESS> <MACADDRESS>
circuitmap -s <PROTOCOL> <INTERFACENUM>
<NETADDRESS> <MACADDRESS> <CIRCUIT>
Description: Allows the user to view and/or modify a Protocol’s Circuit Map (i.e.,
address-to-circuit) table for the device. The -a option shows the user the
current HostMap information for the device. The -d option allows the
user to delete an entry from the table. The -s option allows the user to
insert a static entry into the table. The -f option allows the user to flush
the table. The device must be initialized after changing the Circuit Map.
Options: Not Applicable
MIBNav-> bridge disable all
bridge disable 1
bridge enable 1
bridge