User`s guide

WAN Configuration Using Local Management
162 CSX200 Family User’s Guide
DDS Interface Configuration
This section describes the features of the WAN Interface Configuration screen. Access the screen
by using the arrow keys to highlight the WAN INT CONFIG command field at the bottom of the
Physical Configuration screen, then press ENTER. The WAN Interface Configuration screen
shown in Figure 76 displays.
Figure 76 WAN Interface Configuration Screen
WAN INTERFACE CONFIGURATION
RETURN
SAVE
Interface Number: [002]
Max Xmit Unit: [0]
Line Coding: [NONE]
Active Protocol: [NONE]
148204
CSX200 Local Management Flash Image Version: xx.xx.xx
001
002
PT# IF# LID STATE PT# IF# LID STATE
001 Enet UP