User`s guide

WAN Configuration Using Local Management
CSX200 Family User’s Guide 153
Sync Clock Source — Displays the clock source as External, Internal or Split. The default
setting is External. The Internal and Split settings are for Cabletron testing purposes only. Always
set this field to External.
Sync Tx Clock Speed — Cabletron testing purposes only. Displays 64000 (bps) upon start-up.
Sync Rx Clock Speed — This field displays the manually inputted receive clock speed. The
default setting for this field is 64000 (bps). The information for this field is normally supplied by
the Service Provider.
Synchronous Interface Configuration
Access the WAN Interface Configuration screen from the WAN Physical Configuration screen by
using the arrow keys to highlight the WAN Int Config option, pressing ENTER. The WAN
Interface Configuration screen shown in Figure 72 displays.
Figure 72 Synchronous WAN Interface Configuration Screen
WAN INTERFACE CONFIGURATION
RETURN
SAVE
Interface Number: [002]
Max Xmit Unit: [0]
Line Coding: [NONE]
Active Protocol: [NONE]
148204
CSX200 Local Management Flash Image Version: xx.xx.xx
001
002
PT# IF# LID STATE PT# IF# LID STATE
001 Enet UP