User`s guide

General Configuration Using Local Management
128 CSX200 Family User’s Guide
Version — The version number of the IP Routing used on the CSX200.
AdminStatusTime — Displays the amount of time elapsed since an IP address was assigned to
the CSX200.
Description — Describes the selected Port.
MAC Address — Displays the physical (MAC) address of the CSX200.
Interf. Type — Displays the type of interface used by the specified port.
Oper Status — Displays the operational status of the selected port.
IPX General Configuration Fields
This section provides a general overview of the procedures required to configure the CSX200. The
following list describes each of the IPX General Config Screen fields.
+PORT- — Use this field to select the routing port that you wish to configure.
Framing — Use this field to select the format of the Frame in which IPX packets are
encapsulated for transmission.
MTU — Use this field to set the Maximum Transmission Unit (MTU).
IPX Routing — Use this field to enable IP Routing Services.
IPX Forwarding — Use this field to enable IP Forwarding.
IPX Address — Use this field to assign an IP Address to the port that you wish to configure.
Selecting a Port for Configuration
Routing Services allows you to choose the ports that you want to configure for IPX routing. To
select a router port to configure for IPX routing, use the arrow keys to highlight the PORT option.
NOTE
You can type in the port number, or you can use the +PORT- option at the bottom of
the screen to scroll through the list of the ports on your device. To use the +PORT-
option, use the arrow keys to highlight the + (to go forward), or the - (to go backward),
and then press ENTER to scroll through the available ports in the direction you have
selected. You can also use the + and - keys to scroll through the available ports.