User`s guide

CSX200 Configuration with QuickSET
88 CSX200 Family User’s Guide
The following define the fields in the Compression & Congestion window.
Interface — Displays the available, pre-configured interface numbers.
Compression — Displays the status of data compression for a specific interface. Options for this
field are either on (box shows a check mark) or off.
The following definitions explain the fields for Frame Relay only:
Committed Burst — Displays the Committed Burst size, which is the maximum amount of data
a user may offer to the network during a calculated time interval. Guarantees this data is not
discarded by the network.
Excess Burst — Displays the Excess Burst size, which is the maximum amount of data by
which a user can exceed the Committed Burst size. This data is not guaranteed to be passed by the
network.
Throughput — Displays the maximum bandwidth of your WAN connection.
To turn data compression on or off for a specific interface, click on the interface number that you
wish to configure in the compression scroll list, then click the compression check box. Clicking the
A
pply Changes button applies the changes to the interface.
Once compression configuration is complete, click on the Save button to save any changes you
make, then click on the Exit button to exit the Compression & Congestion window.