User`s guide

USER’S GUIDE
84 SFVRA Configuration Manager
switched-network access). Configuring circuit access information allows you to configure the
circuit to have a dedicated access.
To add a dedicated access:
1. Click on the Access tab.
2. Click on Add Dedicated Access.
3. Enter a user-defined Access Name.
4. Select the Line Protocol used by the access. Choices are:
• PPP
•HDLC
5. For PRI, V.35, and RS232 circuits: select the Data Rate.
6. For BRI and PRI circuits: select the Bearer Channels that will be used by the access.
7. For V.35 and RS232 circuits: select the Clocking Type. Choices are:
• Internal
•External
8. Click on OK.