User`s guide

USER’S GUIDE
72 SFVRA Configuration Manager
of previously configured connection groups. If you select a connection group, you may also opt
to automatically add a connection from the site to the group’s central site.
Otherwise, you will configure the connection group information at a later time (refer to
Configuring Connection Groups).
Note: It is sometimes advantageous to configure site systems before selecting a connection
group. Directory and hunt group numbers configured for systems are used to initialize
connection dial out phone numbers when a site is added to a connection group. So if
you wait to add the connection group after the system’s telephone information is
configured (under the system’s circuit information), the telephone numbers will
automatically be incorporated into the connection group telephone information. Thus,
this will save you from having to manually enter the telephone information.
8. If you have selected a Connection Group for this site, and the Connection Group has a
configured central site, you may check Add Connection to Central Site. This will automatically
add a connection from this site to the Connection Group’s central site.
9. If you have selected a Connection Group for this site, and the Connection Group does not have
a configured central site, you may check Central Site. This will automatically designate this site
as the Connection Group’s central site.
10. Click on Add to save the site properties.
An example site properties dialog box is shown below.