User`s guide

SFVRA Configuration Manager 29
U SING THE SFVRA-CFG A PPLICATION
SFVRA-CFG Configuration Scenarios
Refer to the section below that pertains to your configuration situation.
NEW NETWORK CONFIGURATION
SFVRA-CFG is a valuable tool when setting up a new network. At a central location, you can use
SFVRA-CFG to configure new CyberSWITCH systems or SmartSwitch Remote Access Modules,
one at a time, then ship them to their remote sites.
The steps for configuring a new network are:
1. Access the system using a device running a terminal application. Connect one end of the
supplied null modem cable to the RS232 console port on the module or CyberSWITCH, and the
other end of the cable to the communication port on the device. On the device you must then
execute a communication package to emulate a terminal (VT100).
Downloading
configuration files
to new systems
1
SFVRA-CFG
Application
Copying configuration
files to folder
3
Downloading files
to remote system
ISDN
Downloading updated
configuration files
to a remote site
2
Assign IP Address
using
ipconfig command
(IP enabled)
CSX1200
CSX5500
MMAC PLUS
Cabletron
Systems
MMAC-Plus with
Remote Access Module
SmartSWITCH
B25B27
B26B28
WORKGROUP REMOTE ACCESS SWITCH
B29
E1 ONLYB-CHANNELS
LAN
10BASE-TRXTXSERVICE
B31
B30 L1
B21B23
B22B24
B17B19
B18B20
B13B15
B14B16
E1
D
T1
D
B9 B11
B10B12
B5 B7
B6 B8
B1 B3
B2 B4
POWER