User`s guide

USER’S GUIDE
144 SFVRA Configuration Manager
To begin configuring SNMP Management Groups:
From the menu bar click on Functions then click on SNMP, or click on the toolbar. Then click
on Add. The following screen will then be displayed:
Use this resulting screen and the following sections to complete the SNMP Management Group
configuration.
CONFIGURING SNMP MANAGEMENT GROUP PROPERTIES
1. Using the above Properties window, enter a user-defined Group Name for the SNMP
Management Group you are configuring.
2. Click on Add.
CONFIGURING SNMP MANAGEMENT GROUP COMMUNITIES
SNMP Community Names identify the community to which an SNMP Manager, along with the
Agent(s) that it manages, belongs. It is used to authenticate an SNMP PDU. “public” is a widely
used Community Name. These SNMP Communities are supported by devices at the sites included
in this SNMP Management Group. To configure Communities:
1. Click on the Communities tab.
2. Click on Add.
3. Enter a user-defined Community Name. This name will be associated with a defined MIB Access
Level.