Specifications

QUICK START
40 CyberSWITCH
c. Under AppleTalk Port Information, configure a WAN UnNumbered port:
• Select the WAN UnNumbered port type.
d. Under AppleTalk Static Routes, configure a static route to Central:
•Enter Extended for Central’s network type (the default).
•Enter 10-13 as the destination network range (Central’s network range).
•Enter 0.0 as the next hop (it’s over an unnumbered link).
•Enter Central as the next hop’s device name.
•Enter 2 as the number of hops for this route.
•Enter Engineering as Central’s default zone name.
•Enter Marketing as Central’s second zone name.
4. Under Security, select System Options and Information, then under System Information:
a. Set your System Name (Remote). This matches up with Remote device information
configured on Central.
b. Set your System Secret (Remote_S). This matches up with Remote device information
configured on Central.