Specifications

9032277-04 Software Superseded by CS3/MMS3
5-33
Problems Resolutions Included in CS2/MMS2
13. Pingable models now receive Alerts generated from SNMP Traps.
14. Final changes have been made to allow printing of more than one
model per page.
15. SPECTRUM Data Export scheduling no longer fails with the
message: Not authorized to use cron.
16. Cisco 2501s and 7500s modeled as Rtr_Cisco are no longer missing
applications and lacking necessary containers.
17. CLI no longer fails to connect from SpectroWatch script.
18. The printer dialog box for the Print-View on NT systems now
displays, showing the default printer selected.
19. There is no longer a need to manually update the vendor ID list
and vendor Name list before running the Event Configuration
Editor.
20. Model types and models are now visible in the Reports UI
Statistics and Events pick lists.
21. Components in SPECTRUM 5.0rev1 are no longer being
deselected during installation and causing Install to fail in the
link phase. Using newtar instead of tar now ensures that Install
retrieves all components.
22. In the Event view, clicking on the Filter dialog box Cancel button
now properly restores the last applied model type list.
23. Two attribute IDs that had previously been swapped in the
GnSNMPDev Redundancy and Model Reconfiguration Options
GIB now accurately match the corresponding field label.
24. In a distributed environment, the Salt tool now shows the model
or landscape name for models in remote landscapes.
25. Users can now control at the Gen_IF_Port level whether an
interface will alarm in response to a linkDown trap.
26. Patch installation on NT no longer fails with a syntax error
message.