Specifications

9032277-04 Software Superseded by CS3/MMS3
5-7
Other Resolutions Included in CS1/MMS1
AutoDiscovery causes IH Timer Threads to max out and never
decrease. Adisc finishes ok but the server seems to get bogged down
and performance suffers.
Network load on CsiRptr model is incorrect.
EMM-E6 with two WAN Brims will not configure.
In the IRM2/IRM3 Performance View, the Load is always zero.
Changes in this patch affect all installations which include: SM-
CIS1001, SM-CPORT, SM-CSI1072, SM-GEXT, SM-CSI1026, SM-
COMBRG, SM-CISAPP, SM-COMRPTR, SM-GENTR, SM-COMMAN,
SM-GNBDG, SM-GNRTR1, SM-MMSW, seh, SM-CSI1000 and SM-
TRHUBSTK.
Not all DLCI port models appearing on Rtr_Bay_Wflet DTE. The user
is unable to edit a default SpectroWATCH off of the DLCI_Port model
type.
Destroying any model after performing a find_attr_by_oid crashes the
SpectroSERVER.
Purify reports leak in CsIHLostAndFoundDestroy::do_destroy.
SpectroWATCH calculation causes erroneous overflow error.
Cisco routers don't send link up event to clear link down alarm.
SpectroSERVER crashes due to problems with SpectroWATCH.
Other Resolutions Included in CS1/MMS1
The following additional problem resolutions were incorporated into
the CS1/MMS1 software and are being superseded by the CS2/MMS2
software.
1. Incorrect SpectroWATCH formulas for PacketRateIn and
PacketRateOut
2. Cleaned up memory leaks in ECM
3. Support was added for an indirect Component OID specification
attribute. A 3Com device for which a MM is now being developed