Specifications

Patches Originally Superseded by CS1/MMS1
Software Superseded by CS3/MMS3 Software Release Notice for 5.0rev1
5-6 CS3 and MMS3
SEHi's are being modeled as GnSNMPDevs.
Change the event generated at VNM shutdown so that it gets sent to
the VNM model.
Add CsIHEpiPoll functionality to improve fault isolation for EPI
models.
The type fields for some EPI requests are not being set correctly.
If the user model has a Community String other than ADMIN, when
they try to connect to the 5.0rev1 SERVER from a 4.0rev3 GRAPH,
from the command line, the following error appears and no GRAPH
appears.
% ./SpectroGRAPH -vnm xxx.xxx.xxx.xxx
Opening a service to xxx.xxx.xxx.xxx
CsSecurity: Error, Error reading user model.
Error Code = 0x1
While purifying SPECTRUM 5.0rev1 with CS1/MMS1 and P27 a
memory leak was detected.
If the user is filtering with DisSysOIDList, don't create GnSNMPDevs
for devices that have a blank sysOID.
There is a problem with router redundancy and router reconfiguration
running at the same time.
The customer would like certain types of non-physical interfaces to be
modeled. These are the ISDN interfaces that contain the secondary IP
Address, and from which the backup link status can be read.
In the I/O Statistics view off the VNM Performance view, data is not
displayed in the Network I/O graph if the network card is a hme0
rather than the standard le0 card.
Occasionally the SERVER core dumps when bringing up the I/O
Statistics view off the VNM Performance view.
The model name is being duplicated for the CT_Stp_App model of
some Cabletron devices. The customer is seeing this for 6H122-08's,
6E132-25's and 6E12-06's. It is happening on some but not all.