Specifications

9032277-04 Software Superseded by CS3/MMS3
5-3
Patches Originally Superseded by CS1/MMS1
SPECTRUM_5.0rev1.P04
A request has been made to add a "flagable" option so that child
attribute information is not gathered. Without it, the Server pegs at
98% for the time (3+minutes) it takes to gather attributes.
The mask strings stored in the description field for a 4.0rev3
configuration are not shown in the Mask window when that
configuration is imported into 5.0.
Capturing of host configurations from a HubCat5000 (having brought
up Ecm through the CatStackAPP application) fails.
Capturing a host configuration from a router by following the
directions in the user's manual fails.
After creating and saving a template with all attributes, select the
template. No attributes show on the right hand side where the list
usually is.
SPECTRUM_5.0rev1.P05
Generating multiple html reports gives the same header for each.
There are problems with printing to A4 paper in tabular reports.
Change scheduled reports to use SpectroSHELL.
In a summary report, either created through the report formatter or
with the included UpDownExec.rib, a line break is included after each
summary.
Saving the print command in default.PRF for reports causes .gif
creation failure.
SPECTRUM_5.0rev1.P06
5.0rev1 SANM cannot handle distributed environments if one
environment is a SpectroSERVER running SPECTRUM 4.0rev3.
SPECTRUM_5.0rev1.P07
5.0rev1 ARS Gateway cannot handle distributed environments if one
environment is a SpectroSERVER running SPECTRUM 4.0rev3.
SPECTRUM_5.0rev1.P08
Obsoleted by P16.