Specifications

MMS3 Known Anomalies
MMS3 Software Characteristics Software Release Notice for 5.0rev1
4-16 CS3 and MMS3
Interface view and the Chassis or Device Interface views display
incorrect information. This problem will be addressed in a future
release of SPECTRUM.
2. The SSR_PortIf icons are missing information, particularly VLAN
information. This will be addressed in a future release of
SPECTRUM.
SM-CSI1095, STS16 Token Ring Switch
1. When in the Device Chassis view, selecting Print from the File
menu and then clicking Print View and OK results in a
distortion of the images on the right side of the view.
2. The DevTop Chassis view does not work properly for connecting to
other devices; you should use the DevTop Interface view.
SM-3CM1001, 3Com Netbuilder
The 3ComNetBld2 model type models GnSNMPDev when using
Model by IP. A workaround for this problem is to use the Model Type
Editor to change the Desc_Key_Word to read: SW/NBII;SW/NB. This
problem will be addressed in a future release of SPECTRUM.
SM-3CM1007, 3ComLinkSwitch 1000
In the Security Users view on Windows NT systems, a message box
displays when an "Add Entry" action fails. Selecting the OK button
sometimes causes the SpectroGRAPH to exit.
SM-3CM1010, 3Com US Robotics Modem
A default GIB view will appear if the Performance view of the
HubUSRMP is accessed from the Alarm view. The Performance view
can be accessed from other views.
SM-3CM1011, 3Com LinkSwitch 1100/3300
When in the Device Chassis view, selecting Print from the File menu
and then clicking Print View and OK results in a distortion of the
images on the right side of the view.
SM-BAY1000, HubBayStack 450
1. On UNIX systems, a default GIB displays for the Detail view that
is accessed from the Icon Subviews menu of the ports in the
Device, Logical, and Devtop views (BS450_24 board).