Specifications

9032277-04 MMS3 Software Characteristics

4-15

MMS3 Known Anomalies

2. The Switching Application Interface Conﬁguration view is missing

the IfIndex and Max VPCs columns. This is a ﬁrmware related

issue.

3. When you double-click one of the rows in the Switching

Application AAL5 VCC Performance view, the Detail view displays

with red boxes around VPI and VCI. This is a ﬁrmware related

issue.

4. There may be red boxes in the CAC Stats view of the Switching

Application for all model types. This is a ﬁrmware issue that is

ﬁxed with ﬁrmware 2.2.8 or greater.

5. The Load values in the Performance views for the interfaces

(Device Interface view and DevTop view) show FAILURE. This is a

ﬁrmware issue that will be ﬁxed in a subsequent release.

6. When a ZX-250 is modeled, there may be attached SW_Link

models. The Performance view of the SW_Link will show all values

as FAILURE instead of the correct values.

7. Interfaces in the DevTop view for a ZX-250 may be labeled

incorrectly. This is a ﬁrmware related issue.

8. The Ethernet, Software Loopback, and LAN emulation interfaces

in the Device Interface and DevTop views of a 9A100 may not be

addressed properly. This is a ﬁrmware related issue.

9. Several ﬁelds are red boxed in the Switching Application System

Extensions view for an SS6500_CSM. This is a ﬁrmware related

issue.

10. Several ﬁelds are red boxed in the Switching Application System

Information view for an SS6500_CSM. This is a ﬁrmware related

issue.

11. For ﬁrmware version 02.04(9), the UNI Versions Table is showing

blank. This table, which can be accessed from the Switching

Application, shows correctly for earlier ﬁrmware versions.

SM-CSI1091, SmartSwitch Router

1. The SmartSwitch Router may show incorrect data after the device

conﬁguration is changed and a reconﬁgure is run on the device

model in SPECTRUM. Speciﬁcally, the SlotPortIndex attribute

does not get updated. Subsequently, the port models in the DevTop