Specifications

9032277-04 MMS3 Software Characteristics
4-11
Problems Resolved in MMS3
Third Party Management Module Problem Resolutions
SM-CAT1005, Catalyst 29xx
1. A Cisco Catalyst C2924M-XL now models as a HubCat29xx with a
device type of Cat_2924MXL. It had been modeling incorrectly
with a device type of Cat_2926R.
2. The Off Page Reference Iib for the HubCAT29xx no longer has an
extra "(" in one of the entries for OPRYArw.Loc (down arrow).
Therefore, SpectroGRAPH no longer crashes when navigating into
the DevTop view of a newly connected device.
SM-CHP1002, ChipCom OnLine/OnCore Hub
The Corebuilder 5000 (Chipcom ONcore Hub) now discovers correctly
with the proper connections to other devices. The problem was that
the device would not get placed in the DevTop view under normal
modeling circumstances and proper port resolution did not occur.
SM-CIS1001, Cisco Router II
The Configuration view and Interface Configuration table of the
Rtr_Cisco model have been modified so that all fields display.
SM-CIS1002, Cisco Lightstream
1. The SpectroSERVER no longer terminates during AutoDiscovery.
2. There are no longer several red boxed fields showing in the Node
Statistics view, and the Primary Application button in the Model
Information view no longer persists on "Wait..."
SM-CIS1004, Cisco Access Server
1. Dialup_Links are no longer incorrectly created on the Access
Server, AS5x00, PPP ports.
2. CiscoView now launches correctly on the NT platform.
3. CiscoView now launches from the Access Server’s menu.
SM-CIS1005, Cisco 3810
Alarms are now created on Frame Relay Ports of the Cisco_MC3810
model.