Specifications

Problems Resolved in CS3
CS3 Software Characteristics Software Release Notice for 5.0rev1
3-2 CS3 and MMS3
• CS3/MMS3 supersedes all of the problem resolutions originally
incorporated in the CS1/MMS1 software for the first time.
See the Section titled Other Resolutions Included in CS1/MMS1
on Page 5-7 for descriptions of these items.
• CS3/MMS3 supersedes all of the off-cycle releases since CS1/
MMS1 was released (i.e., Patches SPECTRUM_5.0rev1.P17
through SPECTRUM_5.0rev1.P51).
See the Section titled Patches Issued After the CS1/MMS1 Release
on Page 5-10 for detailed descriptions of these patches.
• CS3 resolves problems reported in CS2 for the first time.
See the Section titled Problems Resolutions Included in CS2/
MMS2 on Page 5-32 for descriptions of these items.
• CS3 supersedes all of the off-cycle releases (Patches) since CS2/
MMS2 was released (i.e., Patches SPECTRUM_5.0rev1.P52
through SPECTRUM_5.0rev1.P101).
See the Section titled Patches Issued Since the CS2/MMS2
Release on Page 5-34 for descriptions of these items.
A list of all the deliverable files included in CS3 is provided in the
Section titled Files Shipped With CS3 on Page 6-1.
Problems Resolved in CS3
CS3 provides resolutions for the following problems, which have not
been addressed in any previous off-cycle release.
1. The problem was that the Ds3App1407 Application model type
(available in the SmartSwitch 6000 series) had several GIB
problems. The application name was not visible when the
Application view was in the List mode. Also, in the Ds3App1407
Model Information view, the symbols ??? displayed for Model
State, Condition, and Contact Status. In the DS3/E3
Configuration view, the symbol ??? displayed for Loopback
Config, Line Type, Line Coding, and Transmit Clock Source.