Specifications

9032277-04 Software Superseded by CS3/MMS3
5-107
Patches Issued Since the CS2/MMS2 Release
(4) One side is not a FR sub-interface; but other side is FR sub-
interface and has already been modeled.
Using other side FR sub-IF scratchpad to do the normal mapping.
--
The problem was a sw_link that was attached to a Zeitnet switch was
showing a value of "FAILURE" in it's Performance View statistic
fields.
The resolution was to add the ability to use a Gen_IF_port as a
monitor point for the sw_link. This will allow Performance View
statistics to appear.
--
The problem was when a model was created of type Gen9000 or
Gen6000, the ports in the Device->Chassis view were displayed with
an icon similar to what would normally be seen in the DevTop view,
instead of the way ports were normally displayed in the chassis view.
The resolution was to create a new interface icon for use in the
Chassis view.
--
The problem was a memory leak was reported in
CsIHSecondaryAddress::add_to_list(), CsIHRouterMap::FR_discover,
and CsIH450Bd::create_vlan_ports(). Purify had been installed and a
trace was made available.
The resolution was to remove the memory leaks from the code
pinpointed by the Purify traces.
--
The problem was that there were multiple small memory leaks as a
result of modeling BayStack Management Modules. Purify had been
installed and a trace was made available.
The resolution was to remove the memory leaks from the code
pinpointed by the Purify traces.
--