Specifications

Installing CS3
Installation Software Release Notice for 5.0rev1
2-6 CS3 and MMS3
a. On Solaris:
<full path of the vtape_CS3 directory>/newtar xvudf
<full path of the vtape_CS3 directory>/vtape.0
b. On Windows NT:
<full path of the vtape_CS3 directory>/newtar xvpdf
<full path of the vtape directory>/vtape.0
4. Bring up the Install GUI by typing: ./Install
5. In the Installation Configuration window, enter the full path of the
vtape_CS3 directory in the Source Directory field.
6. Enter the user name of the person performing the installation in
the Target Ownership field. This should be a login name other
than root or Administrator.
7. Click OK to begin the CS3 software installation.
NOTE
If the custom installation mode was used to install the 5.0rev1
release, then it is necessary to install CS3 in the custom installation
mode. All user responses to custom script queries should match those
given during the 5.0rev1 installation.
WARNING
WARNING
Do NOT deselect components via the Select Individual
Components button in the Installation Configuration window. The
Install program will automatically select and install those CS3
components that are applicable to your current SPECTRUM
installation. Deselection of components may result in installation
failure and/or incorrect product installation. You may, however, do
SpectroSERVER-only or SpectroGRAPH-only installations.
NOTE
During the installation, getting any of the following errors while the
SpectroSERVER is linking simply means that you need to install the
MMS3 portion of the CD.