Specifications

Patches Issued Since the CS2/MMS2 Release

Software Superseded by CS3/MMS3 Software Release Notice for 5.0rev1

5-70 CS3 and MMS3

respond to the Get_Address_List action. The GmIHRptrSrcAddr

inference handler is getting "no such attr" errors when attempting to

read attributes that do not exist in the CsRipEnetRptr.

The resolution was to add a new method which can be called by an MI

Node if desired to change which attribute ids are used for reads.

The problem was that sometimes the CsIGModel icon in the

QuickFind view (custom view) appeared unselected and could not be

selected manually.

The resolution was to ﬁx the timing issue that was causing this

problem. The CsIGModel should now appear selected and selectable.

The problem was when using the NetWideApp to do tftp downloads for

multiple 6H202-24 and 2H252-25R devices it displays an error that

only states "ﬁles systems". If the customer tries doing multiple

downloads for other devices it works ﬁne. If the customer tries doing a

download for one device at a time for the 6H202-24 and 2H252-25R

devices it works ﬁne.

The resolution was to add a new -force-ct-download ﬂag. The Netwide

app will now launch mftfp with this ﬂag by default. The syntax is:

mtftp -force-ct-download

NOTE: This function will not work for any of the 9AXXX_XX devices.

The problem is that when modeling a Cat1900 the device comes up as

a Rtr_Cisco.

The resolution was to add functionality to recognize a SwCat1900 and

wsc1900LiteFx based on their sysOid values.

The problem is that the SG-Support/CsGib/HubCat5000/CsConfg.GTb

table has incorrect column heights which causes the listbox to create a

horizontal scroll bar outside the viewing area. This causes the

SpectroGRAPH to core dump when viewed if the text exceeds the

speciﬁed length.

The resolution was to change the column heights to ﬁt inside the

viewable area.