Specifications

Patches Issued Since the CS2/MMS2 Release

Software Superseded by CS3/MMS3 Software Release Notice for 5.0rev1

5-60 CS3 and MMS3

The problem is WA_Links are not clearing alarms when WA_Segment

is replaced or moved to a different port with a good condition. The

problem presents itself because alarms are not disasserted before a

model is destroyed.

This has been resolved by disasserting the alarm before the model is

destroyed.

The problem is Gen_IF_Port model names do not show up correctly in

PGUI applications.

This is caused because watches don't work properly when the db ﬂag

is not set.

This has been resolved by using "read_async" calls to get the values.

The problem is SpectroGRAPH needs a user-conﬁgurable timeout

setting.

The resolution was to add the ability to set the connection time limit

with SpectroGRAPH and PGUI apps. Use

CsMailServOpts:set_connect_time_limit to set the value in the

$SPECROOT/app-defaults/spectrum ﬁle.

The problem was VNM activation time was excessive when the

resource: wait_active=yes.

The resolution was to do a background activation and a moot event is

waited upon that gets set when all the models have been activate

instead of having the activation scheduler activate one model at a

time.

The problem was when the customer ﬁrst models a Rtr_Cisco and

brings up the Preferred Addresses table, it is populated with all of the

IP addresses which are located in the ipAddrTable. When the

customer removes any of these IP addresses from the device and does