User`s guide

SFVRA Connection Manager 75
C ONFIGURING U SERS
Telephone
CONFIGURING TELEPHONE
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog appears.
2. Select a user that which you want to configure dial out, or click Add to configure a new user.
The User dialog appears.
3. Select the Telephone tab.
4. Select ISDN, Dedicated, or Digital Modem as the Connect Type.
Note: The user must be added to the database before a telephone number or a calling line ID
can be configured.
5. Configure a Telephone Number(s). Click Add in the Telephone Number section, enter a
number, and click OK.
6. Configure a CLID(s), if necessary. Click Add in the Calling Line ID section, enter a CLID, and
click OK. Calling Line IDs are available only for ISDN and Dedicated connect types.
7. Enter a SubAddress. SubAddress is available only for ISDN and Dedicated connect types.
8. Accept the default Baud Rate. Currently, Auto is the only Baud Rate supported. The Baud Rate
is only available for Digital Modem.
9. Select a Bearer Capability. The Bearer Capability is only available for Digital Modem.
10. Click Update to write the new information for the user to the database.
11. Click Close.