User`s guide

USER’S GUIDE
74 SFVRA Connection Manager
CALLING LINE IDENTIFIER (CLID)
Applicable to ISDN connections only, and only when the Check CLID option is enabled. You can
specify eight CLIDs for each user entry. Each CLID for a given user must be unique. This is the
telephone number of the calling party that is connecting to the system. In some areas this
information is passed to the system on the ISDN incoming connection message. The system will
compare the incoming CLID with the value configured in the User List. If the numbers are identical
the connection will be established. Otherwise, the system will reject the incoming call. This
identifier must be identical to the number received on the ISDN connection.
When two remote devices share the same line (a single point-multipoint ISDN line), they can also
configure the same CLIDs if they both also have some other type of authentication configured (for
example, PAP, CHAP, or Bridge MAC Address Authentication).
S
UBADDRESS
The SubAddress is used by a CyberSWITCH when it attempts to make a connection to a user. A
SubAddress allows the user to share a telephone number with other devices and yet still recognize
calls destined for it.
U
SER MODEM BAUD RATE
The baud rate at which data will be transmitted. The only selection at this time is Auto. Auto means
the device will negotiate the baud rate automatically, with user intervention.
U
SER MODEM BEARER CAPABILITIES
The frame type that is used to encapsulate the digitized analog modem signals. Choices are Speech
or 3.1 kHz Audio.