User`s guide

SFVRA Connection Manager 57

ONFIGURING

SERS

Protocols

Configuring IPX RLAN

1. On the Functions menu, select Users, or click on the toolbar. The User List dialog appears.

2. Select a user that which you want to configure for the IPX RLAN options, or click Add to

configure a new user. The User dialog appears.

3. Select Bridging on the Protocols tab.

Note: If Bridging has not been configured for this user, see Configuring the Bridging Protocol

for more information.

4. Enter an IPX Network Number, if necessary.

5. Select the Watchdog Spoofing tab.

6. Change any IPX or SPX spoofing options that you desire, or accept the defaults.

7. Select the Packet Handling tab.

8. Change any Packet handling options that you desire, or accept the defaults.

Note: The Watchdog Spoofing and Packet Handling options are the same for both IPX and

IPX RLAN. Changing the options on the IPX tab identically changes the options on the

IPX RLAN tab, and vice versa.

9. Click Update to write the new information for the user to the database, or click Add to create the

newly configured user.

Note: If you are adding a new user to the database, a User Name must be defined on the

Address tab.

10. Click Close.

Note: A WAN (Remote LAN) IPX Network Interface must be defined on all Remote Access

Switches that each Bridging with IPX RLAN user can access. Refer to the IPX RLAN

Network Interfaces section in the CyberSWITCH documentation for further information.