User`s guide

USER’S GUIDE
52 SFVRA Connection Manager
SERIALIZATION PACKET HANDLING
Serialization packets are used to detect unauthorized duplication of NetWare Software. Servers
send serialization packets to pass their serialization numbers to other servers to verify the server
software has not been copied. By default the automatic filtering option for serialization packets is
set to Always Discard.
M
ESSAGE PACKET HANDLING
Message Waiting packets are sent by servers to attached clients to inform them that the server has
a message to send to them. When the server receives the reply to the message-waiting packet it
sends the actual message to the client. The server will send another message waiting packet to the
client every two seconds until it receives a response or until the connection with the client is
terminated. By default the automatic filtering option for message waiting packets is set to Always
Discard.
Configuring IPX Spoofing
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog appears.
2. Select a user that which you want to configure for the IPX Watchdog Spoofing, or click Add to
configure a new user. The User dialog appears.
3. Select IPX on the Protocols tab.
Note: If IPX has not been configured for this user, see Configuring the IPX Protocol for more
information.