User`s guide

SFVRA Connection Manager 39
C ONFIGURING R EMOTE A CCESS S WITCHES
Pooling
CONFIGURING REMOTE ACCESS SWITCH POOLING
1. On the Functions menu, select CyberSWITCH, or click on the toolbar. The CyberSWITCH
List dialog appears.
2. Select a CyberSWITCH that which you want to configure an IP Address Pool, or click Add to
configure a new CyberSWITCH. The Remote Access Switches dialog appears.
3. Select the Pooling tab.
4. Enter a Start IP Address. This address is included in the range.
5. Enter an End IP Address. This number is included in the range.
Note: The range of addresses should be limited to the same subnet.
6. Click Enable IP Pool Addressing.
7. Click Update to write the new information for the CyberSWITCH to the database, or click Add
to create the newly configured CyberSWITCH.
Note: If you are adding a new CyberSWITCH to the database, a CyberSWITCH Name, IP
Address, and TCP Port Number must be defined on the Properties tab.
8. Click Close.