User`s guide

USER’S GUIDE
38 SFVRA Connection Manager
Note: An IP address should not be configured for the user (either locally or in SFVRA-CONN) if
an IP address is to be assigned to the user from the IP address pool.
S
TART IP ADDRESS
The Start IP Address field designates the beginning of a range of IP addresses that are used by this
CyberSWITCH to assign IP addresses to any user that does not already have an IP address
configured. The range is inclusive. An address is required before enabling the IP Pool. IP addresses
should be entered in the dotted decimal notation: “XXX.XXX.XXX.XXX”.
E
ND IP ADDRESS
The End IP Address field designates the end of a range of IP addresses that are used by this
CyberSWITCH to assign IP addresses to any user that does not already have an IP address
configured. The range is inclusive. An address is required before enabling the IP Pool. IP addresses
should be entered in the dotted decimal notation: “XXX.XXX.XXX.XXX”.
E
NABLE IP POOL ADDRESSING
Enables IP Pooling for this CyberSWITCH. The Start and End IP Addresses must be configured
before enabling this feature. IP Pool Addressing must be disabled before reconfiguring the start
and/or end addresses. This feature dynamically assigns IP addresses to participating users.