Manualshelf

User`s guide

ManualsBrandsCabletron Systems ManualsComputer equipmentCyberSWITCH CSX150
31323334353637383940
SFVRA Connection Manager 35
C
ONFIGURING
R
EMOTE
A
CCESS
S
WITCHES
CyberSWITCH Properties
CYBERSWITCH GROUP
This feature allows CyberSWITCH systems and users to be grouped together to manage which
CyberSWITCH systems are available to each user.
N
UMBER OF CHANNELS
The number of ISDN and/or Digital Modem channels which the Remote Access Switch currently
supports. These numbers are based on the hardware configuration of the Remote Access Switch.
This feature is optional for adding a CyberSWITCH, however, connections can not be made to the
CyberSWITCH unless the numbers of channels is greater than zero.
C
HANNELS RESERVED
The number of ISDN and/or Digital Modem channels that are reserved for use only by priority
users that are designated on the Priority User’s table. This number can not exceed the number of
channels configured for the CyberSWITCH. This feature is optional.
CONFIGURING REMOTE ACCESS SWITCH PROPERTIES
1. On the Functions menu, select CyberSWITCH, or click on the toolbar. The CyberSWITCH
List dialog appears.
2. Select a CyberSWITCH that which you want to configure Properties, or click Add to configure
a new CyberSWITCH. The Remote Access Switches dialog appears.
3. Select the Properties tab.
4. Enter a unique name for the CyberSWITCH. The name does not need to match the System
Name configured on the CyberSWITCH.
5. Enter the IP Address, using dotted decimal notation, of the Network Interface on the
CyberSWITCH through which a TCP connection may be established to the SFVRA-CONN.
6. Enter the TCP Port number on the Ethernet-2 resource to which the physical LAN for interface
corresponding to the IP Address is connected.
7. Optional: select a previously configured CyberSWITCH - User Group.
Note: CyberSWITCHES may only belong to one group.
8. Enter the number of ISDN and/or Digital Modem channels configured for the CyberSWITCH
based on its hardware configuration.
9. Optional: enter the number ISDN and/or Digital Modem channels that are reserved for
Priority Users.
10. Click Update to write the new information for the CyberSWITCH to the database, or click Add
to create the newly configured CyberSWITCH.
11. Click Close.
Note: Additional information about configuring the CyberSWITCH systems themselves can be
found in the CyberSWITCH documentation.