User`s guide

USER’S GUIDE
34 SFVRA Connection Manager
CYBERSWITCH PROPERTIES
The Properties tab displays the basic configuration parameters of the CyberSWITCH. For
configuration, each Remote Access Switch must have a unique name and IP address. A unique-to-
the-Remote Access Switch TCP port number is also required for communication with SFVRA
Connection Manager. CyberSWITCHES may only belong to one group or no groups. See
Configuring CyberSWITCH - User Groups for more information.
The number of channels is based on hardware availability. Check adapters to find the number of
ISDN and Digital Modem lines that are available. Channels Reserved indicates the number of
B-channels that will be available only to Priority Users.
C
YBERSWITCH NAME
A name used to uniquely identify this CyberSWITCH in the SQL Database. This name is
mandatory and must be unique, however, it doesn’t have to match the System Name configured
on the actual CyberSWITCH.
IP A
DDRESS
The IP address of the Remote Access Switch’s LAN port through which a TCP connection may be
established to the SFVRA-CONN.
TCP P
ORT
The TCP port used by the SFVRA-CONN to communicate with the CyberSWITCH. Note that you
can assign a user-defined port number, but that the SFVRA-CONN TCP port number must be
entered identically on both the CyberSWITCH and the SFVRA-CONN.