User`s guide

USER’S GUIDE
200 SFVRA Connection Manager
IP_POOL_END
The last address used to create a pool of addresses in the IP_POOL table for the CyberSWITCH.
ENABLE_DYN_IP_ADDR
Indicates if IP Pooling is enabled or disabled for the CyberSWITCH. If enabled, an entry is created
in the IP_P
OOL table for each address between IP_POOL_START and IP_POOL_END for the
SERVER_NAME. A value of TRUE indicates that IP Pooling is enabled, while FALSE means it is
disabled.
GROUP_ID
Represents the group to which the CyberSWITCH belongs. This correlates to the GROUP_ID field
in the GROUPS table.
STATUS
Indicates the current state of the TCP/IP connection between the CyberSWITCH and SFVRA
Connection Manager. “0” indicates that the SFVRA Service recognizes the CyberSWITCH in the
database, but there is currently no TCP/IP connection between the CyberSWITCH and SFVRA-
CONN. “1” indicates that a TCP/IP connection has been established between the CyberSWITCH
and SFVRA-CONN. “2” indicates that the CyberSWITCH was recently added to the SFVRA
database, but the SFVRA Service has detected it yet.
ACCESS_SERVER_STATUS
The SFVRA Service creates entries in this table when calls are active to a CyberSWITCH.
SERVER_NAME
The CyberSWITCH to which this entry belongs.
ISDN_CHAN_IN_USE
The current number of ISDN channels in use by the CyberSWITCH.
MODEM_CHAN_IN_USE
The current number of Modem channels in use by the CyberSWITCH.
CALLING_NUMBERS
Entries are created in this table by the Client interface when a user is configured to have either
telephone numbers or CLIDs.
USER_NAME
The user to which this number belongs.