User`s guide

SFVRA Connection Manager 195
A PPLE T ALK N ETWORK E XAMPLE
Configure Network Proxies
9. Configure a telephone line for central site calls.
In order for a CyberSWITCH to call user “SITE2,” the type of connection needs to be defined
and a telephone number for the user must be available. Select the Telephone tab. Select ISDN as
the Connect Type. Under Telephone Number(s), click Add, enter
913135553232 , and click OK.
10. Configure the user “SITE2” to be callable by the central site.
Return to AppleTalk on the Protocols tab. Enable the Callable feature.
11. Click Update and then click Close.
12. Click Close on the User List dialog.
CONFIGURE NETWORK PROXIES
Note: The Client interface should be activated before proceeding the following steps.
Using the detailed instructions for these steps found in Configuring Network Proxies, complete the
configuration information indicated in the following procedures.
1. On the Functions menu, select Network Proxies, or click on the toolbar. The Network Proxies
dialog appears.