User`s guide
USER’S GUIDE
190 SFVRA Connection Manager
3. Configure CyberSWITCH Properties.
On the Properties tab, enter
APPLETALK_CSX
for the CyberSWITCH Name. Enter
128.1.1.4
for the IP Address. Enter
2000
for the TCP Port. Select
APPLETALK
as the CyberSWITCH Group.
Enter
2
for the Number of ISDN Channels. The Properties tab will appear as follows:
4. Click Add and then Close.
5. Click Close on the CyberSWITCH List dialog
CONFIGURE USER RECORDS
Note: The Client interface should be activated before proceeding the following steps.
Using the detailed instructions for these steps found in Configuring Users, complete the
configuration information indicated in the following procedures.
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog is then
displayed as follows: