User`s guide

SFVRA Connection Manager 181
IPX N ETWORK E XAMPLE
Configure Network Proxies
8. Assign the user to a group.
In order for the user “tampabr” to be allowed to connect with the CyberSWITCH “IPX_CSX,”
the user must be in the same group. Select Groupings on the Access tab. Select
IPX in the User
is not a member of box and click Add.
9. Click Update and then click Close.
10. Click Close on the User List dialog.
Next enter the user information for orlandobr. This user will not have an External Network
Number configured. It will assume the Network Number of the RLAN interface that it connects.
This user is also a PPP bridge, and is configured using the same authentication as user tampabr,
and the password will be obpswd. User orlandobr should be added to the IPX group.
CONFIGURE NETWORK PROXIES
Note: The Client interface should be activated before proceeding the following steps.
Using the detailed instructions for these steps found in Configuring Network Proxies, complete the
configuration information indicated in the following procedures.
1. On the Functions menu, select Network Proxies, or click on the toolbar. The Network Proxies
dialog appears.
2. Configure basic routing properties.
On the Properties tab, select
RIP V.1 as the Routing Protocol.