User`s guide

USER’S GUIDE
180 SFVRA Connection Manager
3. Define the User Name.
On the Address tab, enter
tampabr as the User Name. Only the User Name is required and it
must be unique. Other fields are informational for use by the Network Administrator or Help
Desk.
4. Enable the Bridging Protocol.
In order for the Remote Access Switches to be able to communicate with each user, the protocol
used by the user needs to be identified. Select Bridging on the Protocols tab and Enable the
Bridging Protocol. Enter
0128 for the IPX Network Number.
Note: An IPX Network Number is not required by this topology, since there isn’t a remote file
server on this user’s LAN. If no Network Number is configured, it will be assigned by the
Remote LAN interface connected to the bridge.
5. On the Restrictions tab, accept the default values.
6. Configure Authentication for user “tampabr.”
Select Authentication on the Access tab. Select
PPP as the Layer 2 Protocol. Select PAP as the
Authentication Method. Enter
tbpswd for the User Password.
7. Click Add.
Certain user features require the user to be configured in the database before the feature itself
can be configured. These feature include: configuring static routes, assigning a user to a group,
and configuring telephone numbers and Calling Line ID’s. The next parameter that we will
configure for user “tampabr” is the CyberSWITCH - User Group, therefore we need to add the
user to the database first.