User`s guide

SFVRA Connection Manager 179
IPX N ETWORK E XAMPLE
Configure User Records
9. Configure a telephone line for central site calls.
In order for a CyberSWITCH to call user “dallasnet,” the type of connection needs to be defined
and a telephone number for the user must be available. Select the Telephone tab. Select ISDN as
the Connect Type. Under Telephone Number(s), click Add, enter
912143339999 , and click OK.
10. Configure the user “dallasnet” to be callable by the central site.
Return to IPX on the Protocols tab. Enable the Callable feature.
11. Click Update and then click Close.
12. Click Close on the User List dialog.
CONFIGURING REMOTE LAN USERS
The IPX Remote LAN users “tampabr” and "orlandobr" are remote bridges, and will assume the
IPX Network Number of the Remote LAN interface on the central site. This user will be configured
without call restrictions.
Note: This example only provides screen shots that are distinctly different from those in the
previous configuration section. If necessary, refer to the example screens in Configuring IPX
WAN Users for more detail.
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog appears.
2. To add remote users, click Add. The User dialog appears.