User`s guide

USER’S GUIDE
176 SFVRA Connection Manager
4. Enable the IPX Protocol.
In order for the Remote Access Switches to be able to communicate with each user, the protocol
used by the user needs to be identified. Select IPX on the Protocols tab and Enable IPX and the
IPX WAN Protocol. Select
Triggered RIP/SAP as the Routing Protocol. Select ACTIVE as the
WAN Peer Type.
Note: Although “dallasnet” is a callable user, the Callable feature can not be enabled until a
telephone number is configured. We will refer back to the IPX tab later on in this
example to enable this feature.