User`s guide

USER’S GUIDE
174 SFVRA Connection Manager
4. Click Add and then Close.
5. Click Close on the CyberSWITCH List dialog.
CONFIGURE USER RECORDS
Note: The Client interface should be activated before proceeding the following steps.
In this example, there are two types of IPX users, IPX WAN and Remote LAN. Using the detailed
instructions for these steps found in Configuring Users, complete the configuration information
indicated in the following procedures.
CONFIGURING IPX WAN USERS
The IPX WAN user “dallasnet” is an IPX router with a Novell file server connected to its remote
LAN. This user will be configured without call restrictions. A telephone line will be configured so
that the central site may call “dallasnet” and use the resources on the remote file server.
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog is then
displayed as follows: