User`s guide

USER’S GUIDE
164 SFVRA Connection Manager
6. Configure a static route.
Select IP on the Protocols tab. Under Static Routes, click Add Route. Enter
128.3.0.0 as the
Destination IP Address, and press the Tab key. Accept the default Subnet Mask, and press the Tab
key. Enter a Metric value of
1 , and click Add. The IP tab will appears as follows:
Note: Although “SITE2” is a callable user, the Callable feature can not be enabled until a
telephone number is configured. We will refer back to the IP tab later on in this
example to enable this feature.