User`s guide

USER’S GUIDE
162 SFVRA Connection Manager
3. Define the User Name.
On the Address tab, enter
Monterey for the User Name. Only the User Name is required and it
must be unique. Other fields are informational for use by the Network Administrator or Help
Desk.
4. Enable the Bridging Protocol.
In order for the Remote Access Switches to be able to communicate with each user, the protocol
used by the user needs to be identified. Select Bridging on the Protocols tab and enable Bridging.
Although the user Monterey is a bridge, we need to configure an IP (Sub-) Network Number.
Enter the IP Address
198.12.10.0 . The IP tab should appear as shown below:
5. On the Restrictions tab, accept the default values.
6. Configure Authentication for user “Monterey.”
Select Authentication on the Access tab. Select
PPP as the Layer 2 Protocol. Select CPP as the
Authentication Method. Enter
q3bay for the Password. Enter 123123123123 for the Ethernet
Address.
7. Click Add.
Certain user features require the user to be configured in the database before the feature itself
can be configured. These feature include: configuring static routes, assigning a user to a group,
and configuring telephone numbers and Calling Line ID’s. The next parameter that we will
configure for user “Monterey” is the CyberSWITCH - User Group, therefore we need to add
the user to the database first.