User`s guide
SFVRA Connection Manager 157
IP N
ETWORK
E
XAMPLE
Configure User Records
3. Configure CyberSWITCH Properties.
On the Properties tab, enter
IP_CSX
for the CyberSWITCH Name. Enter
128.1.1.2
for the IP
Address. Enter
2000
for the TCP Port. Select
IP
as the CyberSWITCH Group. Enter
23
for the
Number of ISDN Channels. The Properties tab will appear as follows:
4. Click Add and then Close.
5. Click Close on the CyberSWITCH List dialog
CONFIGURE USER RECORDS
Note: The Client interface should be activated before proceeding the following steps.
In this example, there are three types of IP users, IP WAN, IP WAN with a Remote Bridge Device,
and IP WAN with a PPP Device. Using the detailed instructions for these steps found in Configuring
Users, complete the configuration information indicated in the following procedures.
CONFIGURING IP WAN USERS
The user “Fred Bear” is an IP WAN remote device. This user will be configured without call
restrictions or security.
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog is then
displayed as follows: