User`s guide

IP N ETWORK E XAMPLE
OVERVIEW
This sample network depicts a company that has an IP network with users accessing the network
from their homes, from two satellite offices that have an IP Host that communicates through a
Remote Bridge, and from a branch office that communicates through a router that does not support
IP RIP. This CyberSWITCH uses a Primary Rate line that can support 23 users at 64Kbps.
INITIAL INSTALLATION STEPS
The first step to configuring a network administered by SFVRA Connection Manager is to fill out
the network worksheets located in the CyberSWITCH documentation. Once you complete the
worksheets, you may begin installing SFVRA-CONN. The initial steps are basically the same no
matter how complicated the network. Refer to the System Installation chapter, which describes in
detail each of these steps.
A Network Topology worksheet for this network is included on the following page.