User`s guide

SFVRA Connection Manager 149
B RIDGING N ETWORK E XAMPLE
Configure User Records
6. Configure Authentication for user “Mike Mann.”
Select Authentication on the Access tab. Select
CPP as the Layer 2 Protocol. Select CPP as the
Authentication Method. In this case, we opt to have security check both the Ethernet address and
a password. Enter
JXF30 for the User Password. Enter 000123456789 for the Ethernet
Address. Enable Check CLID for additional security. After the user authentication has been
entered, the Authentication tab will appear as follows:
7. Click Add.
Certain user features require the user to be configured in the database before the feature itself
can be configured. These features include: configuring static routes, assigning a user to a group,
and configuring telephone numbers and Calling Line ID’s. The next parameter that we will
configure for user “Mike Mann” is the CyberSWITCH - User Group, therefore we need to add
the user to the database first.